Hand-Held Light Control! Wireless Keychain Remote Control System. Order Today! While safely sitting in your car, turn on your home’s lights with the simple press of a button on your key chain remote. With the Wireless Keychain Remote Control System (KR
Hand-Held Light Control! Wireless Keychain Remote Control System. While safely sitting in your car, turn on your home’s lights with the simple press of a button on your key chain remote. With the Wireless Keychain Remote Control System (KR19A), you have
Control Your Lights From Across the Room! Save 11% on the Palm Pad Home Control Kit. Order Today and Save $5. Control up to 16 lights and appliances remotely when used with X10 RF base receivers. Dim and brighten control for incandescent lighting. Tu
Hand-Held Light Control! Wireless Keychain Remote Control System Wireless Keychain Remote Control System with Keychain Remote and Wireless Transceiver. While safely sitting in your car, turn on your home’s lights with the simple press of a button on your
Control Your Lights From Across the Room! Save 11% on the Palm Pad Home Control Kit Palm Pad Home Control Kit with 16-Unit Palm Pad Remote Control and 2-Way Transceiver Module- Control up to 16 lights and appliances remotely when used with X10 RF base rec
Take full control of your home?s lighting with this FireCracker starter kit! Within 60 seconds of opening the box, you?ll be able to control two lamps (or a lamp and an appliance) with the included kit! Just imagine the look on your friend?s face when you
X10 (VT38AL-KIT) incredible FloodCam is a weather-resistant wireless colorvideo camera with built-in 2.4 GHz transmitter and motion sensor. With it’s attached dual floodlight the FloodCam is easily switched on by the built in motion sensor.
Gotcha! See & Record Everything!
FloodCam Has a
Built-in Motion Sensor!
The amazing FloodCam is a weather-resistant wireless video camera with built-in 2.4GHz transmitter and motion sensor and attached dual floodlight casing. The FloodCam is activated by the integrated motion sensor so that when someone approaches your home, the FloodCam floodlights (bulbs not included) come on, turning night into day and the camera catches the startled intruder on video! The camera transmits its picture via a built-in 2.4 GHz transmitter, to a Video Receiver which you connect to a TV anywhere in your home. The FloodCam sends the wireless signals even through walls, up to 100 feet so you can watch and record all the action!
Smart “Built-in” Wireless Motion Sensor!
Multi-Camera Set Up: In a multi-camera setup, the motion sensor sends wireless Radio Frequency (RF) signals to an X10 Transceiver (or VCR Commander II.) The Transceiver receives the signals from the Motion Sensor and passes them onto your house wiring. These signals send the information back out to switches off the other cameras or to sound a chime, illuminate hallway lights, etc.
The video camera always switches on when motion is detected and the FloodCam floodlights always switches on when it is dark and motion is detected. (An X10 Transceiver is NOT necessary for this but required for multi-camera applications.)
Easy to Use & Integrate into Your Existing Camera System: This is a very easy system to install – just a few connections and you’re up and running (assuming you will use the FloodCam to replace an existing outdoor light fixture). If there’s not an existing fixture, you will need to install a wall box and run conduit to it. If you need help installing a wall box and running conduit please contact a local X10 professional installer.
You Control Everything: Underneath the FloodCam unit is a hidden control panel that allows you to easily configure all the settings. Set the Channel to the same channel as your Video Receiver (not included).
The FloodCam FLOODLIGHT CONTROL function allows you to detect motion at all times (LIGHT) or only when it gets dark (DARK). Using the TIME DELAY dial, you can adjust how long the camera waits to turn off after motion has stopped. The CAMERA MODE switch lets you set how the camera responds to motion and X10 controllers. Using the two dials at the bottom, set the camera’s unit code and house code (example A-3). Keep your cameras in groups of four for better scanning control.
Additional Features & Specifications:
2.4 GHz transmitter
Camera uses “Instant-ON” technology. No warm-up time when turning on or switching between cameras. You get instant LIVE crisp video! (X10′s top of the line camera technology)
Easily integrates into your multi-camera system. Acts just like an XCam2 Camera!
Weather-resistant casing. Great for outdoors. (Operating Temp.: 32 to 131F)
Field of View:60 degrees
Resolution: 310 TV Lines
Auto Shutter: 1/60 to 1/15,000 sec.Note: Your TV can only view 30 frames per second.
Motion Sensor Range: 20 feet.
Max wattage: 150W per lamp holder.
Requires 120VAC
Get all this for only $79.99!
Motion Activated FloodCam – Normally $79.99! Included In Kit! An XCam2 wireless camera combined with motion-activated floodlights! Instantly and automatically turn on powerful floodlights whenever the motion sensor detects motion, and catch it all on-FloodCam camera! Outdoor motion-activated lights deter theft and vandalism-and always give you a lit path to the door. The FloodCam is an easy addition to an existing digital video surveillance system or a great way to start! Broadcast directly to your TV or VCR (requires a video receiver).
*Light bulbs not included.
Wireless Video Receiver – Normally $39.99! Included In Kit! This magnetic contact closure works with any X10 Wireless Home Security System. When a door or window is opened, interrupting of the magnetic-contact closure, the Door/Window Sensor will signal the Protector Plus Voice Dialer System wirelessly, alerting your system of the intrusion. Each sensor is self-checking to ensure professional reliability.
VCR Commander II – Normally $49.99! Included In Kit! Whether you’re home or away on vacation, the VCR Commander records “only the action” seen from your XCam2 Video Cameras. Anytime your digital video surveillance system’s Motion Sensors are triggered, the VCR Commander wirelessly enables the appropriate X10 Camera and your VCR to automatically record the activity! No wasted tape!
Don’t wait any longer Order Your FloodCam Today!
For Only: $79.99 With Free Shipping for orders over $49.99